88
CAMERA SETTINGS MENUS CONTROL
When a Panasonic camera is connected to the VIDEO IN connector of the encoder, it is possible to control the camera
settings menus using the CGI commands.
■ Format
■ Response
■ Important Notice
It is necessary to enter the parameter value for the "CHSEL" parameter.
The parameter name should be used in combination with the "CHSEL" parameter.
■ Control Item List
Item Parameter name Parameter value Description
VIDEO IN connector number CHSEL 1 - 4 To designate the VIDEO IN connector
number to be controlled
Menu display MENU on To designate the menu to be displayed
off To designate the menu to be closed
Move the cursor upward UP 1
Move the cursor downward DOWN 1
Move the cursor to the left LEFT 1
Move the cursor to the right RIGHT 1
Change the camera menu SET set To move to the lower level
esc To move to the higher level
RESET set To reset
reset To reset all
HTTP /1.1 204 No Content
CR
LF
Cache-Control: no-cache
CR
LF
Content-Type: text/plain
CR
LF
Content-Length: 0
CR
LF
CR
LF
http://(IP address of the encoder)/cgi-bin/camctrl.cgi?CHSEL=(Parameter value)&(parameter name)=(parameter value)
HOW TO USE THE CGI COMMANDS
