Panasonic WJ-GXD900 Manual

A SERVICE OF

next previous

111

UPDATING

Update the firmware of the encoder/decoder by executing the update file transferred to the encoder/decoder in advance.

Refer to the page 62 or page 79 to transfer the file to the encoder or the decoder respectively.

■ Format

●

Updating the encoder

● Updating the decoder

■ Response

■ Important Notice

The user name and the password authentication will be required when trying to update the firmware of the

encoder/decoder. Enter a user name with access level 1 (ADMINISTRATOR) and the password registered to the

encoder/decoder to be updated.

HTTP /1.1 200 OK

CR

LF

Cache-Control: no-cache

CR

LF

Content-Type: text/plain

CR

LF

Content-Length: XX

CR

LF

(XX: Display the octet number of the Message-Body decimally)

CR

LF

http://(IP address of the decoder)/cgi-bin/decoder.cgi?com=netvup&submit=START

http://(IP address of the encoder)/cgi-bin/encoder.cgi?com=netvup&submit=START