18
System Example (Switching streaming video)
This is a system example with 8 cameras and 4 monitors, and switching streaming video using a PC.
Refer to the "SWITCHING STREAMING VIDEO" section of "HOW TO USE THE CGI COMMANDS" on page 90 about
the CGI command to switch streaming video.
Note: All the "DESTINATION PORT No." of each encoder should be the same. The IP addresses to be assigned for
"DESTINATION IP ADDRESS" should be different according to the respective VIDEO IN connectors.
Refer to the following pages for further information related to the system above.
Encoder: NETWORK page (refer to page 56), VIDEO page (refer to page 44)
Decoder: NETWORK page (refer to page 73), VIDEO page (refer to page 69)
It may be required to change the network settings of a PC to switch streaming video.
OPERATE
STATUS
MPEG2 Encoder WJ-GXE
900
1 2 3 4 5 6 7 8
OPERATE
STATUS
MPEG2 Encoder WJ-GXE
900
1 2 3 4 5 6 7 8
OPERATE
1
ACT1000100LINK1
STATUS
2 3 4 5 6 7 8
MPEG2 Decoder WJ-GXD
900
PC
The pictures of the camera whose IP address
(RECEIVING IP ADDRESS) had been set on the
VIDEO page of the decoder will be displayed on
the monitor when the decoder is started up.
VIDEO IN VIDEO IN
MPEG2 Encoder 1
MPEG2 Decoder
MPEG2 Encoder 2
100BASE-TX
100BASE-TX/1000BASE-T
100BASE-TX
10BASE-T/
100BASE-TX
Switching hub
(100Mbps/1000Mbps compatible)
VIDEO OUT
Monitor 1 Monitor 2 Monitor 3 Monitor 4
43
12 3 4
2
14321
Camera 1
DESTINATION
IP ADDRESS:
239.192.0.1
Camera 2
DESTINATION
IP ADDRESS:
239.192.0.2
Camera 3
DESTINATION
IP ADDRESS:
239.192.0.3
Camera 4
DESTINATION
IP ADDRESS:
239.192.0.4
Camera 5
DESTINATION
IP ADDRESS:
239.192.0.5
Camera 6
DESTINATION
IP ADDRESS:
239.192.0.6
Camera 7
DESTINATION
IP ADDRESS:
239.192.0.7
Camera 8
DESTINATION
IP ADDRESS:
239.192.0.8
• Settings for the MPEG2 Encoder 2
IP ADDRESS: 192.168.0.21
DESTINATION PORT No.: 50000 (Same for all)
RESOURCE PORT No.: 51000 (Same for all)
Camera Input CH DESTINATION IP ADDRESS
5 1 239.192.0.5
6 2 239.192.0.6
7 3 239.192.0.7
8 4 239.192.0.8
• Settings for the MPEG2 Encoder 1
IP ADDRESS: 192.168.0.20
DESTINATION PORT No.: 50000 (Same for all)
SOURCE PORT No.: 51000 (Same for all)
Camera Input CH DESTINATION IP ADDRESS
1 1 239.192.0.1
2 2 239.192.0.2
3 3 239.192.0.3
4 4 239.192.0.4
• Settings for the MPEG2 Decoder
(In case of displaying pictures from camera 1 - 4)
IP ADDRESS: 192.168.0.30
RECEIVING PORT No.: 50000 (Same for all)
Monitor (CH) RECEIVING IP ADDRESS
1 (1) 239.192.0.1
2 (2) 239.192.0.2
3 (3) 239.192.0.3
4 (4) 239.192.0.4
