Conditions
• CLIP, COLP, CLIR, and COLR are only available for the
KX-TDA100, KX-TDA200, and KX-TDA600.
• The availability of this feature is dependent on the contract with the telephone company.
• The CLIP/COLP number for the connected ISDN port can be used for the ISDN terminal devices which
cannot be assigned their own CLIP/COLP number, such as a doorphone.
• COLP/CLIR/COLR Assignment for Each Port
Each service can be enabled or disabled on each ISDN port of the PBX.
• CLIR Button and COLR Button
It is possible to switch between CLIP and CLIR by pressing the CLIR button, and COLP and COLR by
pressing the COLR button. A flexible button can be customized as the CLIR or COLR button.
• The CLIP/COLP number must match the telephone number provided by the telephone company.
Otherwise it will be ignored or replaced by another number.
• When using a private network, the extension number assigned for each extension through system
programming is sent for CLIP/COLP. (® 13.1.21 Private Network Features—QSIG—CLIP/COLP (Calling/
Connected Line Identification Presentation) and CNIP/CONP (Calling/Connected Name Identification
Presentation))
PC Programming Manual References
3.14 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
→CO Setting—
Subscriber Number
→Supplementary Service
—
COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT,
CCBS, E911
3.17
[1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—
Subscriber Number
4.8 [2-6-1] Numbering Plan
—Main—Features
→
COLR Set / Cancel
→ CLIR Set / Cancel
→ Switch CLIP of CO Line / Extension (KX-TDA100/KX-TDA200/KX-TDA600 only)
4.17 [2-9] System Options—Option 4— Send CLIP of CO Caller to ISDN—when Transfer (CLIP of Held
Party)
5.12 [3-5-1] Incoming Call Distribution Group
—Group Settings—Main—
CLIP on G-DN Button
(KX-TDA100/KX-TDA200/KX-TDA600
only)
6.1 [4-1-1] Wired Extension—Extension Settings
→Main—
Extension Number
→Option 1— CLIP ID
→Option 3— CLIP on Extension/CO (KX-TDA100/KX-TDA200/KX-TDA600 only)
→Option 3— CLIR
→Option 3— COLR
6.5 [4-1-4] Wired Extension—Flexible Button
—
Type
6.10 [4-2-1] Portable Station—Extension Settings
→Option 1—
CLIP ID
→Option 3— CLIP on Extension/CO (KX-TDA100/KX-TDA200/KX-TDA600 only)
→Option 3— CLIR
→Option 3— COLR
6.13 [4-2-3] Portable Station—Flexible Button
—
Type
6.17 [4-3] DSS Console— Type
PT Programming Manual References
[003] Extension Number
[606] CLIP Number
Document Version 2008-11 Feature Manual 55
3.1.13 CLIP (Calling Line Identification Presentation)
