58
“
Special Features
FLASH Button
(Cordless\Handset) (Base\Unit)
Pressing (FLASH/CALL\WAIT/VOICE\MAIL) or (FLASH/CALL\WAIT) allows you
to use special features of your host PBX such as transferring an extension
call or accessing special telephone services (optional) such as call waiting.
≥Pressing (FLASH/CALL\WAIT/VOICE\MAIL) or (FLASH/CALL\WAIT) causes
to release following operations:
≥—temporary tone dialing,
≥—muting your conversation.
Selecting the flash time
(Cordless\Handset)
The flash time depends on your telephone exchange or host PBX.
You can select the following flash times: “700, 600, 400, 300, 250, 110,
100 or 90 ms (milliseconds)”. Your phone comes from the factory set to
“700 ms”.
Make sure the base unit and cordless handset are not being used.
1
Press (MUTE/FUNCTION).
2
Scroll to “Program” by pressing (›) or (‹).
3
Press (fl) (Yes key).
4
Press (fl) (Yes key) at “Set flash time”.
≥The current setting is displayed.
5
Select the desired time by pressing (›) or
(‹).
6
Press (fl) (Save key).
≥A beep sounds.
≥To exit the programming mode, press (OFF).
≥You can exit the programming mode any time by pressing (OFF).
≥If the unit is connected via a PBX, PBX functions (transferring a call etc.) might
not work correctly. Consult your PBX supplier for the correct setting.
Flash time
:700ms
43
1
=Save
Flash time
:110ms
43
1
=Save
Flash time
:110ms
1
Save directory
Ringer volume
43
1
=Yes
LCD contrast
1
Program
43
1
=Yes
1
Set flash time
Set line mode
43
1
=Yes
