A SERVICE OF

logo

RTM-ATCA-7350 Installation and Use (6806800H30F)
Hardware Preparation and Installation Connecting Optical Fibers
36
2.8.3 Connecting Optical Fibers
When RTM-ATCA-7350 is configured with the FC daughter card, it provides two external 2G FC
interfaces. Optical fibers are used to connect RTM-ATCA-7350 to the external Storage Area
Network (SAN) storage system. Optical modules for the FC daughter cards must be obtained
separately. Recommended modules are FINISAR FTRJ8519P1BNL-HW, FINISAR
FTRJ8519P2BNL-HW.
As shown in steps 1 and 2 in the figure below, insert the optical module in the FC interface and
then insert the optical fibers in the optical module.
Figure 2-9 Connecting the Optical Fibers to RTM-ATCA-7350
2
1