Equipment Installation Manual,
GEN-X Electronic Flight Bag
1069-2510-01 D.doc
1069-2510-01
Rev D
Page 10 of 27
SPECIFICATIONS:
Physical:
The GEN-X RPU attaches to its mount through two .25” guide pins and a two lock turn wing nuts. The
mount is attached to the airframe via four mounting holes. See the paragraph titled Outline Drawing for
further details.
RPU
Height.................................................2.655” (Includes mounting flange)
Width..................................................8.561” (Includes mounting flange)
Depth..................................................12.810” (Includes mounting flange)
Weight................................................7.8 lb. (Includes mounting flange)
DU 8”
Height.................................................9.90”
Width..................................................6.90”
Depth..................................................1.705”
Weight………………………………3.4 lb.
DU 10”
Height.................................................11.60”
Width..................................................8.13”
Depth..................................................1.705”
Weight………………………………4.6 lb.
DU 12”
Height.................................................13.00”
Width..................................................9.20”
Depth..................................................1.76”
Weight………………………………5.6 lb.
Electrical:
Emergency Buss (Monitored only)
Input Voltage .....................................28 VDC Nominal (10Vdc – 32Vdc operational)
Input Current......................................0.001 Amp at 28 VDC
Essential Buss
Input Voltage .....................................28 VDC Nominal (10Vdc – 32Vdc operational)
Input Current......................................3.1 Amp at 28 VDC
