Filter
Top Products
9
V-250 User’s Guide
1 Select one of the last numbers dialed by pressing the
Navigator-down button when the V-250 is in stand-by
mode (not in any configuration screen).
2 Dial one of the recently dialed numbers by pressing the
Off-hook button when the phone number is selected.
Note: The V-250 stores phone numbers up to 24 digits
long (longer phone numbers will be truncated).
You can clear all of the recently dialed phone numbers.
1 Select one of the last numbers dialed.
2 Press and hold the On-hook button for about 2 seconds
or until a YES / NO prompt appears on the LCD.
3 Use the navigator buttons to select YES and press the
Right Softkey to select OK and clear all the recently
dialed numbers from the V-250’s memory.
5.3 Call Timer
The LCD displays the time of your ongoing phone calls. The
timer starts when you press the Off-hook button and stops
when you press the On-hook button.
5.4 Adjust the Volume
The volume of the V-250 earpiece and speaker can be
adjusted into three levels. They are low: I, medium: II and
high: III.