Filter
Top Products
V-250 User’s Guide
10
Adjust the volume level during a call
by using the Right Softkey to select
VOLUME. The V-250 alternates
between the three levels of volume.
Stop pressing the Right Softkey
when you have selected the level you
want.
In our example the volume is at high
level (
III).
5.5 Flash Function
Press the R/INT button on the V-250 to put an existing call on
hold and pick up a second call. Press the R/INT button again
to switch back to the original call.
Note: You must subscribe to call waiting with your phone
service provider in order to place external calls on
hold.
5.6 Make Intercom Calls
If multiple V-250s are registered to the same base station, it is
possible to make calls from one handset to another. This kind
of call is referred to as an intercom call.
1 Press and hold the R/INT button for 2 seconds, a short
beep sounds.
2 Enter the handset number of the handset you wish to call.
This number is displayed on the handset next to the
handset name.
III
0:23
666-6666
VOLUME