Filter
Top Products
V-250 User’s Guide
16
Direct Call Activate and configure the Direct Call feature on the V-
250. You can program a phone number which is dialed
automatically when any key is pressed on the V-250.
Note: You can only use the direct call feature
with another handset registered to the
same base station as the V-250.
Press the On-hook button to end a direct call. Press and
hold the On-hook button for 2 seconds to turn the Direct
Call mode off.
Wallpaper Select from one of 2 wallpapers.
Set
Contrast
Change the contrast on the LCD display.
Register Register the V-250 with a base station.
Deregister Unregister the V-250 from a base station.
Select
Base
Connect to different base stations that you have
registered with. You can only communicate with one
base station at a time.
Base Pin The V-250 cannot change the base station’s PIN.
Note: Use the web configurator to change
the base station PIN.
FUNCTION DESCRIPTION