Filter
Top Products
Prestige 2000W Quick Start Guide
12
3.3 SIP Settings
The Prestige uses Session Initiated Protocol (SIP), an internationally recognized standard for implementing
VoIP. The last step in initial configuration is to register your Prestige with your voice service provider’s SIP
server.
3.3.1 Registrar Server
Configure the Registrar settings to have the Prestige register with your provider’s SIP registrar server.
Note: If you have no registrar server information, use the SIP server IP address and port number.
6 Select PPPoE Pwd.
1. Network Mode
2. PPPoE Name
Select Back
7 Clear the PPPoE password and enter your’s.
8 The Prestige restarts when you return to the main screen.
PPPoE Pwd
*************************
Ok Aa1@ Clear
1 Select SIP Settings in the first menu screen.
6. Settings
7. Wireless
Select Back
2 Select Registrar.
2. OutboundProxy
3. Proxy Server
Select Back
3 Select Registrar IP.
2. Port
3. Expiry Time
Select Back
3. PPPoE Pwd
5. SIP Settings
1. Registrar
1. Registrar IP
VoIPon Solutions www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0) 1245 600560