Filter
Top Products
30
Basic Operation
Your t 2447 Handset is equipped with a 2.5mm Headset Jack for use with an optional
accessory Headset for handsfree operation. If you choose to use the Headset option,
you must obtain an optional accessory Headset, which is compatible with the t 2447.
To purchase a Headset, call VTech Customer Service at 1-800-595-9511.
Once you have a compatible 2.5mm Headset, locate the Headset Jack on the t 2447
Handset. Connect the plug on the Headset cord to the jack (under a small rubber flap)
on the cordless Handset. The plug should fit securely. Do not force the connection.
NOTE:
Whenever a compatible Headset is
connected to the cordless Handset, the
microphone on the Handset will be muted.
This is done to limit the effect of background
noise.
Belt Clip
The t 2447 is also equipped with a
detachable belt clip. Align the pins on the
inside edge of the clip with the notches
on the sides of the Handset. The belt clip
should snap securely into place. Do not
force the connection.
Headset Operation
To Attach To Remove