Filter
Top Products
14
Basic Operation
Telephone Memory
6. When you finish entering the name, press SELECT or PROG. The screen displays
ENTER NUMBER.
7. Enter the telephone number. Use to backspace and make corrections.
Press REDIAL/PAUSE to store a pause in the dialing sequence.
-OR-
Press REDIAL/PAUSE to display the last number dialed from this phone.
8. Press SELECT or PROG to store your entry. The screen displays DISTINCT
RING? and the current setting.
9. Press or to change the setting. Choose Y (for yes) if you wish the phone
to alert you to calls from this number by changing to a distinctive ringing
pattern after the first ring. Choose N for a normal ringing pattern.
10. Press SELECT or PROG to confirm your selection. If you chose Y, a D will be
displayed with the memory entry.
Edit a Number/Name Stored in Memory
1. Press and hold the memory location key (1 through 9) of the entry you wish
to edit.
2. When the screen displays the entry you want to edit, press SELECT. Then
press or until EDIT flashes.
3. Press SELECT. The screen displays the name and number. The cursor
appears at the end of the name. Use , and the dial pad keys to edit the
name. Press SELECT to move on to edit the number. Use to backspace
and make corrections. Press SELECT to move to edit the distinctive ring
setting.
4. Press SELECT to save the edited information
Delete a Number/Name Stored in Memory
1. Press and hold the memory location key (1 through 9) of the entry you wish
to delete.
2. When the screen displays the entry you want to delete, press SELECT. Then
press or until ERASE flashes.
3. Press SELECT. The screen displays ERASE NO YES and the number.
4. Press or until YES flashes.
5. Press SELECT.You’ll hear a confirmation beep.
SPEED EDIT ERASE
8005959511
01
SPEED EDIT ERASE
8005959511
01