Filter
Top Products
19
QUICK REFERENCE GUIDE
TO MUTE A CALL
• Press MUTE to disable the
handset microphone.
• Press MUTE again to return to
normal two way conuersation.
TO PAGE THE HANDSET
• To page from the base, press
PAGE .
• To cancel the PAGE either press
PAGE again on the base or press
OFF on the handset.
STORING MEMORY (SPEED) DIAL
NUMBERS:
• The phone should be OFF.
• Enter the number you wish to store
on the LCD up to a maximum of 20
digits.
OR
SET-UP
• Plug AC adaptor into a standard
electrical outlet and Base Unit
• Set Dial Mode switch to PULSE or
TONE. The unit is factory set to
TONE.
• Let the handset battery pack charge
for 16 hours before first use.
• Connect telephone line cord to base
unit and telephone jack.
MAKING CALLS
• Press the PHONE key. When the
"PHONE ON" indicator is displayed
and you hear a dial tone, dial the
number.
• Enter the number to be dialed on
the LCD and then press the PHONE
key.
ANSWERING CALLS
• To answer a call, press any key
other than OFF , MUTE , or the
Volume Keys. The handset will
NOT auto-answer when lifted off
the base cradle.
HANGING UP
• Press OFF or place the handset
in the cradle to hang up a call.
TO PLACE A CALL ON HOLD
• Press HOLD on the handset
to place an active call on hold.
Press HOLD again to return to
the call.
• Press PROG . The LCD will
display "PROGRAM LOCATION "
• Enter a two digit memory location
(01 .. 20), the unit will store the
number, emit a happy tone to
confirm successful programming
and exit program mode.
STORING
THE PHONE SHOULD BE
OFF
ENTER PHONE NUMBER
PRESS
YOU WILL SEE
ENTER MEMORY
LOCATION (01-20)
PROG
FLASH
PAUSE
2
3
6
79
#
abc
def
jkl
mno
pqrs
tuv
wxyz
oper
0
tone
MEM
*
5
1
4
8
HOLD
OFF
PHONE
CID REDIAL
PROG
CLR/DEL
MUTE
ghi
1920manual 1/28/99, 3:27 PM19