Filter
Top Products
CHANGING STORED NUMBERS
To change or replace a stored number,
simply store a new number in the
desired memory location following the
instructions listed in, STORING SPEED
DIAL NUMBERS. See page 21.
DELETING STORED NUMBERS
To delete a stored number from
memory do the following:
Press to enter program
mode.
Enter the memory location (00..20).
Press -to exit program mode.
DELETING STORE
NUMBERS
PRESS
@
ENTER MEMORY
LOCATION
(00-20)
PRESS
rml
Stored numbersare retained in memory
even if the base loses its power or the
handset batterv is removed.
If your phone is connected to a PBX
you can store the PBX access number
and a pause before the phone number.
For example, to store 9-PAUSE-555-
1234 in memory location 08, do the
following:
Press
[EG)
Press 08 (memory location)
Press 9
Press
(iiKE]
Dial 5551234
Press
TAKING CARE OF YOUR
TELEPHONE.
Your VTech VT1900 cordless telephone
contains sophisticated electronic parts,
so it must be treated with care.
Avoid rough treatment
Place the handset down gently.
Save the original packing materials
to protect your telephone if you ever
need to ship it.
Avoid water
Your telephone can be damaged if it
gets wet. Do not use the handset
outdoors in the rain, or handle it with
wet hands. Do not install your base
unit near a sink, bathtub or shower.
Electrical storms
Electrical storms can sometimes cause
power surges harmful to electronic
equipment.
For your own safety, use caution when
using
electricappliancesduring
storms.
Your telephone has a durable plastic
casing that should retain its luster for
many years. Clean it only with a soft
cloth slightly dampened with water or
a mild soap. Do not use excess water
or cleaning solvents of any kind.
Remember that electrical appliances
can cause serious injury if used when
you are wet or standing in water. If your
base unit should fall into water, DO
NOT RETRIEVE IT,, UNTIL ;YOU
UNPLUGTHE
POWER
CORDAND
TELEPHONE LINE, CORDS FROM
THE WALL. Then pull the unit out by
,,F,'
'r
the unplugged cords.
.
.:.:,.>-
I
x
STORING SPECIAL CODES
To insert a ause in a phone number,
press
(HOLD)
at the appropriate point
when entering the number. This inserts
a 2 second ause. For longer pauses,
press
@&
twoor more times. Each
press makes the pause 2 seconds
longer and is treated as a stored digit.