VTech VT2431 Telephone User Manual


 
9
Headset Operation
Your GIGAPHONE cordless telephone is equipped with a 2.5mm Headset Jack for
use with an optional accessory Headset for hands-free operation. If you choose to
use the Headset option, you must obtain an optional accessory Headset, which is
compatible with the GIGAPHONE.
To purchase a Headset, call VTECH Customer Service at 1-800-595-9511.
Once you have a compatible 2.5mm Headset, locate the Headset Jack on the
GIGAPHONE Handset. Connect the plug on the Headset cord to the jack on the
cordless Handset. The plug should fit securely. Do not force the connection.
Operation
NOTE :
Whenever a compatible Headset is
connected to the cordless Handset, the
microphone on the Hand-set will be
muted. This is done to limit the effect of
background noise. The following
operational characteristics apply to
VTECH Headsets. The same may also
apply to other, non-VTECH supplied
headsets, but VTECH assumes no
responsibility for their performance.
The VTECH brand compatible Head-set
has a reversible, monaural design. You
can wear your Headset on either ear,
leaving one ear free for room
conversation.
The headband can be adjusted to fit the
contour of your head. Using both hands,
slide the headband up or down so that
it rests comfortably on your head, with
the speaker cushion centered against
your ear. For maximum sound quality,
the flexible microphone should be
positioned at the corner of your mouth,
about one inch from your face.
Belt Clip
The GIGAPHONE is also equipped with
a detachable belt clip. Align the pins on
the inside edge of the clip with the
notches on the sides of the GIGAPHONE
Handset. The belt clip should snap
securely into place. Do not force the
connection.
Additional Information