Filter
Top Products
33
Set Announce Only
CAUTION:
If you turn on the Announce Only option, your callers cannot leave a message.
1. Press MENU until "Set Announce Only" is announced.
2. Press SELECT until desired setting "ON" or "OFF" is declared.
3. Press TIME/SET to confirm, and the setting will be announced.
Note: You can store one OGM for Announce Only mode, and a separate OGM
for Normal (accept messages) mode. The appropriate OGM will be played based
on how you set Announce Only.
Set Base Ringer On/Off
The Base ringer can be turned on or off.
1. Press MENU until you hear "Set
Base Ringer"
2. Press SELECT to toggle between
the choices (ON or OFF).
3. Press TIME/SET to confirm your
selection. Voice prompt of "Base
Ringer is on" or "Base Ringer is
off" will be announced to confirm
your setting.
Set Number of Rings
The Answering System has 4 ring type settings:
2 rings The incoming call is answered after 2 rings.
4 rings The incoming call is answered after 4 rings.
6 rings The incomng call is answered after 6 rings.
Toll Saver
The incoming call is answered after 2 rings only if there are new messages/
memos present. Otherwise, the call is answered after 4 rings. This may help
you avoid long distance charges when retrieving messages remotely.
1. Press MENU until you hear "Set number of rings."
2. Press SELECT until you hear the desired setting "2", "4", "6", or "Toll Saver".
3. Press TIME/SET to confirm your choice. The selected setting is then
announced.
Answering System Setup
Itad Operation