Filter
Top Products
12
Wall Mounting
The Wall Mount bracket is designed
for use on standard Wall Mount plates
only.
1. Line up the tabs on the wall
mount adapter with the holes on
the bottom of the base unit. Snap
the wall mount bracket firmly in
place.
2. Plug the AC adapter into an
electrical outlet, and the DC
connector to the back of the base
unit. If the handset battery pack
has not been charged previously,
place the handset in the base unit
cradle, and allow it to charge for
12 hours.
3. Connect the telephone line cord
to the jack on the back of the base
unit, and the other end to the
wall jack.
4. Mount the base unit on the wall.
Position the base unit so the
mounting studs will fit into the
holes on the wall mount bracket.
Slide base unit down on the
mounting studs until it locks
into place.
1
2
3
Getting Started