Filter
Top Products
www.vtechphones.com
29
Advanced operation
Answering system operation
Personal identication number (PIN)
A four-digit security code is required for remote access to the answering
system from any touch tone telephone. The factory default code is 0000.
To change the PIN on your telephone:
• Press
MENU/SELECT on the handset in idle mode.
• Press or to reach SETUP BS. Press MENU/SELECT.
•
Press or to reach CHANGE ITAD PIN. Press MENU/SELECT.
• The screen displays ENTER PIN.
• Enter the PIN (default
0000) and press MENU/SELECT.
• The screen displays NEW PIN
.
• Enter the desired PIN and press
MENU/SELECT.
• The screen displays REPEAT PIN
.
• Enter the new PIN again and press
MENU/SELECT.
• The screen displays STORED
and you’ll hear a conrmation beep
(if KEY TONE is on).
If a wrong PIN is entered, the screen displays WRONG PIN
, retry
after two seconds.
•
cHANGe ItAd PIN
dIAl tYPe
eNter PIN
eNter PIN
****
New PIN
rePeAt PIN