VTech mi6897 Cordless Telephone User Manual


 
www.vtechphones.com
20
Intercom/nd handset
If you cannot nd your handset(s) press INT/FIND HANDSET on the telephone base to page the
handset(s) for up to 60 seconds.
When the handset is not being used, press
INT/FIND HANDSET.
Press dialing keys to select the called handset number to be called.
Conference call
It is possible to establish a conference call between any two handsets (or
a handset and the telephone base) and the external line.
If the telephone base or a handset is already connected to the external line,
the telephone base or a handset can join the call by pressing SPEAKER on
the telephone base or on a handset. A conference call will immediately
be established. The screens will show:
PHONE 00:00:25
Call transfer
An external call can be transferred from base to handset, handset to handset, or handset to base.
The person at a handset or base can transfer an external call to another handset or base by
pressing INT (SPEAKER or INT/FIND HANDSET on the base). The external call is put on hold
automatically.
• Select the handset number to be transferred (1-4 or 0 for the base.)
The called handset or base will ring and the screen will show
HANDSET 1 IS CALLING.
Pick up the transferred call on the called handset by pressing
, SPEAKER or INT.
The people at the two handsets/base will be able to talk to each other. Either person can hang up
allowing the conversation with the external person to resume.
CALL TRANSFERRED will briey
be displayed on the calling handset.
If the transferred call is not answered within 100 seconds, the intercom attempt will be automatically
ended and the external call will return to the rst handset.
For the INT/FIND
HANDSET
function to work,
the system
handsets need
to be in idle (off)
mode.
Telephone operation