Filter
Top Products
www.vtechphones.com
11
Getting started
To register a handset
When rst purchased, all accessory handsets show NOT REGISTERED
on the screen. To register a handset:
1. Place the handset in its charger (connected to a power outlet.) If
PRESS
FIND HNDST 4 SEC ON BASE does not appear on the screen after a
few seconds, lift up handset and place in the charger again.
2. On the main telephone base,
• Press and hold
INT/FIND HANDSET key for four seconds.
• Release
INT/FIND HANDSET key when IN USE light is on.
The mi6877 comes with one registered handset (named Handset 1). Additonal handsets will be
assigned numbers in the order they are registered (Handset 2, 3, 4). You can register a maximum of four
handsets.
The mi6897 comes with three registered handsets (named Handset 1, 2, and 3). You can register
one additional handset, which will be named Handset 4.
Additional handsets (mi6803) are available from your local authorized dealers or from our website
at www.vtechphones.com in the U.S., or www.vtechcanada.com in Canada.
Up to four extension handsets can be registered with the same telephone base, and two can be in
operation at the same time. Each additional handset purchased will have to be registered separately
following the instruction which comes with the optional handsets.
NOT REGISTERED
PRESS FIND HNDST
4 SEC ON BASE
Registration
• When rst
purchased you
need to charge
your handsets
for ve minutes
before registering
to telephone
base.
• The handset
number is used
as the extension
number.
• If the registration
is not successful
lift all handsets
out of their
telephone base
or charger and
place them
back in the
telephone base
or charger. Try
the registration
process again.
After about 10 seconds the handset will emit a tone and the handset will be assigned the lowest
extension number not previously assigned to another system handset (1-4) when successfully
registered. Repeat steps 1 and 2 if handset is not registered within two minutes.
Four
seconds
later: