Filter
Top Products
24
Advanced Operation
Headset Operation
Your ip 5825 Handset is equipped with a 2.5mm Headset Jack for use with an
optional accessory Headset for hands-free operation. If you choose to use the
Headset option, you must obtain an optional accessory Headset, which is com-
patible with the ip 5825.
To purchase a Headset, call VTech Customer Service at 1-800-595-9511.
Once you have a compatible 2.5mm Headset, locate the Headset Jack on
the ip 5825 Handset. Connect the plug on the Headset cord to the jack (under
a small rubber flag) on the cordless Handset. The plug should fit securely. Do
not force the connection.
NOTE:
• Whenever a compatible Headset is con-
nected to the cordless Handset, the mi-
crophone on the Handset will be muted.
This is done to limit the effect of back-
ground noise.
• When a compatible Headset is con-
nected to the cordless Handset, your
Speakerphone feature will be disabled.
To use your Speakerphone feature, sim-
ply disconnect the Headset from the
Handset.
Belt Clip
The ip 5825 is also equipped with a de-
tachable belt clip. Align the pins on the
inside edge of the clip with the notches
on the sides of the Handset. The belt clip
should snap securely into place. Do not
force the connection.
Headset Operation