Filter
Top Products
23
Basic Operation
Handset Settings
Clear Message Waiting
If, after reviewing all new voice mail messages,
the Message Waiting alert still remains on the
screen and the MESSAGE WAITING LED on Base
is still flashing, you can manually remove the
indication from the screen and turn the LED off.
• From the idle (OFF) mode, press SEL then
or key to CLEAR MSG WAIT.
• Press SEL then the display will ask you TURN
INDICATOR OFF? Press SEL again to con-
firm. To exit, press OFF.
Dial Type (preset to Tone)
• From the idle (OFF) mode, press SEL then
or key to DIAL TYPE.
• Press SEL then use or key to scroll from
TONE to PULSE.
• Press SEL to confirm your setting.
NOTE: When the phone is set for PULSE dial
mode, it is possible to switch to temporary TONE
mode during an ongoing call by pressing
**
**
*. Once
pressed, TONE will be used for rest of the call.
After you hang up, the phone will return to pulse
dialing for the next call.