VTech IP8100 Cordless Telephone User Manual


 
IP8100 series Quick Start Guide
8
Installation With A Router
STEP 1:
Using the blue ethernet cable provided, connect one end into the blue port, labeled “WAN,” located on the back of the
IP8100 series broadband telephone base unit and connect the other end into an available LAN port on your router.
If you have a wireless router, place the base unit at least 3’ away from your router to avoid interference.
Helpful Hint: If all the ethernet ports on your existing router are full, disconnect one of the attached devices
from the existing router. Plug the blue ethernet cable into the now free port on your router. Connect the device
you just unplugged from your router to the yellow “PC/LAN” port located on the back of IP8100 series broadband
telephone base unit.
STEP 2:
Plug the power cord into the power port located on the bottom of your base unit and the other end into the electrical
outlet. This turns the IP8100 series broadband telephone on.
Helpful Hint: DO NOT interrupt this registration process by unplugging the power or by using the handsets until
the READY indicator light on the front of base has gone from flashing yellow to a steady green.
Helpful Hint: Use only the power cord provided in this package; using an older power cord can damage the
broadband phone.
STEP 3:
Check for dial tone by pressing the ON button on your handset. If you do not hear a dial tone, please refer to the
Troubleshooting section of the user manual.
Congratulations! Even if you are transferring your number, you are ready to start taking advantage of the great sav-
ings and superior quality of Vonage right now! Please call 800-342-1791 to setup your voicemail service and to learn
about other free Vonage features included with every Vonage calling plan.