Filter
Top Products
IP8100 series Quick Start Guide
Getting Started
Installation of Batteries in Handset
Follow the steps below:
1. Place the new battery in the handset and align
the two holes in the plug with the socket pins to
snap the plug into place.
2. Replace the battery cover by sliding it upwards.
3. If the new batteries are not already charged,
place the handset in its charger, and allow it to
charge for 10-12 hours. After initial charge, a
maintenance charge of 8 hours should be sufficient.
NOTE: Use VTech battery 80-5808-00-00 or VTech
Replacement 89-1324-00-00. To purchase replacement batteries,
visit us on the web at www.vtechphones.com or call VTech Communications, Inc. at 800-595-9511.
Charging of the Handset Batteries
The handset of your cordless telephone is powered
by rechargeable batteries. It charges automatically
whenever handset is in its charger.
You should charge the batteries for 10-12 hours
when you first receive your phone. You will know
the batteries need charging when:
• The low battery message is displayed.
• The handset seems completely dead, the LCD
is completely clear and does not activate
when you press the keys.
2
• I MPORTANT •
BEFORE YOU BEGIN: Make sure that you have installed and fully charged the handset batteries.