VTech IP8100 Cordless Telephone User Manual


 
PC
DSL or Cable Modem
INTERNET
Base Unit
Handset 1 & 2
NOTE: The IP8100 series telephone is expandable up to
a total of 4 handsets. Uses model IP 811 (sold separately)
WAN Port
4
Installation Without A Router
Warning: Do not route the ethernet cable to outdoors, and ensure that you are using a safety approved
DSL or Cable modem with proper electrical isolation.
PC/LAN Port
STEP 1
Unplug the power cord from your Cable or DSL modem (the device your ISP provided which provides high-speed
Internet). Make sure that you turn your computer off and that you do NOT plug in your broadband telephone until
instructed to do so.
Helpful Hint: The modem should be powered off for at least 10 minutes. If it is turned off for a shorter period
of time, it may “remember” old information that will prevent it from working properly.