www.vtechphones.com
15
Advanced operation
Directory
The directory on the handset can store up to 50 entries, each entry consists
up to 32 digits and 16 characters.
• The directory can be accessed while in idle mode by pressingThe directory can be accessed while in idle mode by pressing or the
center NavKey twice.
• Press OFF/CLEAR to exit the menu without saving any changes.
• DIRECTORY EMPTY is displayed on screen when there is no entry in
the directory.
Store a directory entry
• Press the center NavKeyPress the center NavKey in idle mode to display menu, then press
the center NavKey to enter the directory.
• Press the up or down NavKey or to choose STORE when in the
directory menu. Press the center NavKey to select.
•
The screen displays ENTER NUMBER. Use the dial pad to enter the
number. Press REMOVE to backspace, or press and hold REDIAL/PAUSE
for at least three seconds to insert a dialing pause. A p will be displayed
to show the dialing pause. Press the center NavKey .
• The screen displays ENTER NAME. Use the dial pad (see the Character
chart on page 16) to enter the name. Press REMOVE to backspace, or
press # to insert a space. Press the center NavKey .
• When the directory is full and a save is attempted, LIST FULL will be
displayed.
• If you attempt to save a number already stored in the directory, ALREADY
SAVED will display.
Advanced operation
DIRECTORY EMPTY
LIST FULL
>DIRECTORY
CALL LOG
>STORE
REVIEW
ENTER NUMBER
_