Filter
Top Products
30
Command Description
1
Play all messages.
2
Play new messages.
3
Delete the current
message (during
playback).
33
Delete all old messages.
4
Repeat the current
message (during
playback).
5
Stop.
*5
Hear a list of remote
commands.
6
Skip to the next message
(during playback).
*7
Record a new
announcement.
8
End the call.
0
Turn the answering
system on or off.
Hang up or press 8 to end the call.
NOTES
If you do not press any keys after you
enter the remote access code, all new
messages play. If there are no new
messages, all old messages play.
Once the new messages have played,
the telephone announces the help menu
options. If you do not press any key within
20 seconds, the remote access call
automatically disconnects.
When the answering system memory is
full, the telephone announces,
“Memory is full. Enter the remote access
code.”
4.
•
•
•
Set remote access code
A two-digit security code is required to
access the answering system remotely
from any touch-tone telephone. The
preset code is 19. You can set the code
from 00 to 99.
Press MENU when the phone is not
in use.
Press or to scroll to Answering
sys then press SELECT.
Press or to scroll to Ans sys
setup then press SELECT.
Press or to scroll to Remote
code, and then press SELECT.
Use the dialing keys to enter a
two-digit number.
-OR-
Press or to scroll to a desired
two-digit number.
Press SELECT to save and you hear
a confirmation tone.
1.
2.
3.
4.
5.
6.