Filter
Top Products
6
Connect
You can choose to connect the telephone
base for desktop usage or wall mounting.
NOTES
Use only the power adapters supplied with
this product.
Make sure the electrical outlets are not
controlled by wall switches.
The adapters are intended to be correctly
oriented in a vertical or floor mount
position. The prongs are not designed to
hold the plug in place if it is plugged into a
ceiling, under-the-table or cabinet outlet.
TIP
If you subscribe to digital subscriber line
(DSL) high-speed Internet service through
your telephone line, make sure you install
a DSL filter (not included) between the
telephone line cord and telephone wall
jack. Contact your DSL service provider
for more information.
Connect the telephone base
•
•
•
•
Connect the charger
Mount the telephone base
1. Unplug the telephone line cord (or the
DSL filter) from the telephone wall
jack. Unplug the power adapter from
the electrical outlet. Slide the wall
mount bracket up and remove it from
the wall mount plate.
2. Press down on the tabs on the wall
mount bracket on the telephone base
to release it from tabletop orientation.
Rotate the wall mount bracket down
to wall mount position and then push
it into the telephone base until it
clicks into place.