Filter
Top Products
43
Appendix
Handset display screen messages
NO SIGNAL,
CALL ENDED
Communication between handset and
telephone base is lost during a call.
NOT AVAILABLE
AT THIS TIME
One handset is already viewing the call
log or directory and another handset
attempts to review it.
OUT OF RANGE OR
NO PWR AT BASE
The handset cannot communicate with
the telephone base. Check the telephone
base power connection or move closer.
** PAGING **
The system handset is being paged.
PHONE
The handset is on a call.
PLACE IN
CHARGER
The battery is very low. Place the
handset in the telephone base or charger
for recharging.
REC MEM FULL
Answering system has no recording
time left.
RINGER MUTED
The ringer is muted temporarily during an
incoming or intercom call.
SAVED
Your selection has been saved.
SPEAKER
The handset speakerphone is in use.
UNABLE TO CALL.
TRY AGAIN
You have attempted to make an intercom
call, but the handset you are calling is in
the directory, in the call log, out of range
or on an outside call.
UNABLE TO SAVE
You are attempting to save a caller ID
entry without a name and number.
XX MISSED CALLS
There are calls that have not been
reviewed in your call log.
XX NEW MESSAGES
There are new messages in the
answering system.