VTech CS6328-3 Cordless Telephone User Manual


 
13
Telephone settings
Dial mode
The dial mode is preset to tone dialing. If you have pulse
(rotary) service, you must change the dial mode to pulse
dialing before using the telephone.
Press MENU/SELECT when the handset is not in use.
Press VOL/ or VOL/CID to select
>
SETTINGS,
then press MENU/SELECT.
Press VOL/ or VOL/CID to select
>
DIAL MODE,
then press MENU/SELECT.
Press VOL/ or VOL/CID to choose TONE
or PULSE.
Press MENU/SELECT to conrm your selection.
1.
2.
3.
4.
5.
Home area code
If you dial your local calls using only seven digits (area
code not required), you can program your home area code
so that when you receive a call within your local area, the
telephone number is automatically stored without the area
code in the call log.
Press MENU/SELECT when the handset is not in use.
Press VOL/ or VOL/CID to select
>
SETTINGS,
then press MENU/SELECT.
Press VOL/ or VOL/CID to select
>
HOME AREA CODE, then press MENU/SELECT.
Use the dialing keys to enter the desired home area code.
Press MUTE/REMOVE to delete a digit.
Press and hold MUTE/REMOVE to delete the entire entry.
5. Press MENU/SELECT to conrm.
1.
2.
3.
4.
If, in the future, your telephone service provider requires you to dial the area
code when making a local call, or, if you move to a location that requires it,
delete the home area code you have already programmed, following the
steps above. After you have deleted the home area code, _ _ _ will appear in
the display.
HOME AREA CODE
___
While on a call, press TONE to temporarily change to tone dial mode.
>HOME AREA CODE
DIAL MODE
>DIAL MODE
LCD LANGUAGE
DIAL MODE
>TONE