www.vtechphones.com
2
Getting started
Use only the
power adapter(s)
supplied with this
product. To order
a replacement,
visit our website at
www.vtechphones.
com or call
1 (800) 595-9511.
In Canada, go to
www.vtechcanada.
com or call 1 (800)
267-7377.
The power
adapters are
intended to be
correctly oriented
in a vertical
or oor mount
position. The
prongs are not
designed to hold
the plug in place
if it is plugged into
a ceiling or an
under-the-table/
cabinet outlet.
•
•
DC 7.5V
Telephone base
Telephone line cord
Electrical outlet
(not controlled by
a wall switch)
Telephone base
power adapter
Telephone
wall jack
Charger
Charger
adapter
Telephone base and charger(s) installation
Install the telephone base and charger(s) as shown below. Make sure that the
electrical outlet is not controlled by a wall switch. If you subscribe to high-speed
Internet service (Digital Subscriber Line - DSL) through your telephone lines,
you must install a DSL lter between the telephone base and the telephone
wall jack. The lter will prevent noise and caller ID problems caused by DSL
interference. Please contact your DSL service provider for more information
about DSL lters.
DSL lter (not included)
required if you have
DSL high-speed
Internet service