Filter
Top Products
13
The Wall Mounting bracket is
designed to fit on standard Wall
Mounting plates.
1. Choose a spot near an electrical
outlet and a telephone jack.
Your phone requires a modular
telephone jack (120v AC). The
power cord is six feet long; make
sure there is an electrical outlet
within reach of the base. A wall
switch should not control the
outlet. If the switch is ever turned
off, your phone may not function
(unless you have a fully charged
battery in the spare battery
charger).
2. Position the wall-mounting
bracket on the base. Line up the
tabs on the wall-mounting bracket
with the holes on the bottom of the
base. Snap the wall-mounting
bracket firmly in place.
3. Mount the base on the wall.
Position the base so the mounting
studs will fit into the holes on the
wall-mounting bracket. Slide the
base down on the mounting studs
until it locks into place
4. Connect the telephone line cord.
The telephone line cord has a
snap-in plug at each end. Insert
one end into the jack on the back
of the base, and insert the other
end of the plug into the wall jack.
5. Plug the AC adapter into an
electrical outlet and the DC
connector into the power jack
located on the back of the base
unit.
WALL MOUNTING