Filter
Top Products
26
Handset and Base Operation
Answering Calls
From the Handset
Press the appropriate LINE key, or HANDSFREE to use the Handset
Speakerphone option.
If the Handset is active on one line when the idle line rings, you will hear
a special alert tone, signifying an inbound call. This alert is designed to
minimize disruption of the call in progress. You can then:
• Press OFF twice to end the first call, then press the appropriate LINE
key (or HANDSFREE to use the Handset Speakerphone option) to answer
the new call;
- OR -
• Press the appropriate LINE key to answer the new call. The original
call will automatically be placed on HOLD. You can end the new call
by pressing OFF, then return to the original call by pressing the
appropriate LINE key.
You can also Conference both lines together. See Conference Calling,
further on in this User’s Manual.
From the Base Unit
If a line is ringing, pressing SPEAKERPHONE (or HEADSET if you are using
a Headset connected to the Base) will answer the inbound call.
Press SPEAKERPHONE (or HEADSET ) to end your call.
ERASE
Press RDL. Scroll to the desired phone number, press SELECT, then
press ERASE.
SAVE
Press RDL. Scroll to the desired phone number, press SELECT, then
press SAVE.
You'll then be prompted to ENTER NAME. Use the keypad to enter the
letters of the name. If you make a mistake, press CLR to backspace. To
insert a space, press . When finished, press SAVE.
For more information on entering phone numbers into the Directory, see
the section entitled Memory.
From the Base Unit
• Follow the same procedure used for the Handset Redial.
- OR -
• Press the appropriate LINE key and then SPEAKERPHONE (or
HEADSET), then press REDIAL key to dial the last number in the
Base Unit redial memory.
Advanced Operations