Filter
Top Products
25
Handset and Base Operation
Making Calls
From the Handset
• Press a LINE key (or, HANDSFREE
to use the Handset Speakerphone
feature).
Dial the phone number.
- OR -
• Dial the phone number first; then
press a LINE key (or HANDSFREE).
From the Base Unit
Just like the Handset, you can either
access a dial tone first, then dial your
number, or you can dial your number
first, then access a line.
• With both lines idle, pressing
SPEAKERPHONE (or HEADSET if
you are using a headset connected to
the Base) will access LINE 1.
• If you want to access LINE 2 with
both lines idle, press the LINE 2 key
first, then press SPEAKERPHONE
(or HEADSET).
• If one line is IN USE, press HOLD,
then press SPEAKERPHONE (or
HEADSET) will automatically access
the idle line.
• If both lines are IN USE (2 or more
system Handsets are active, with at
least one on each line), pressing
SPEAKERPHONE (or HEADSET)
will access the current line.
•
•
Redial
From the Handset
The Handset and Base Unit will remember the last 5 phone numbers
dialed. From the idle mode, press RDL. Scroll until the desired phone
number is highlighted. Then press the appropriate LINE key to dial the
number (follow the above instructions in Making Calls).
You can also delete and save redial numbers in the Directory.
Advanced Operations