Filter
Top Products
3
Step 2:
Set up your Vonage
®
Device
1. Unplug your existing modem’s power cord.
Leave your modem connected to your cable or DSL
phone line that supplies your Internet connection.
2. Unplug the Ethernet cable that connects your modem to
your computer
or router. Unplug the cable from both
your modem
and your computer (or router).
Note: In some instances the modem may be connected to the computer
via a USB cord and USB ports. If so, disconnect the cord at both ends
(modem and computer).
3. Wait 60 seconds for your modem to clear its
memory completely.
Existing Modem
Ethernet
Port
USB Port