Filter
Top Products
4-5 Installation of Stations
To install stations, make connections by using station jack model YC-601 (Wall-mounted type) or YC-603
(Flush-mounted type). Since the length of station cord is 3 meters (9.8 feet), the station jack needs to be mounted
within this length.
Station jack YC-603 (Flush-mounted type)
Mount switch box and make piping and wiring arrangements
before the station jack is installed.
Station jack YC-601 (Wall-mounted type)
Mount this jack on a wall, pillar or desk. Utilize either knock-out
holes provided on the top and the bottom of the case or a cable
entry hole in the base for connecting the cables to the ex-
change.
Other stations
Please refer to instruction manual of each station.
Knock-out hole
(provided on the top and bottom)
Screw
for base
Screw
Case
Cable entry hole
Base
Plate
Case
Wall
Base
Screw
for case
Screw
for box
Cable entry hole
Switch box
Screw
for plate
– 8 –