Filter
Top Products
Part 2. Installation of EXES-2000 system
Installing and adjusting procedures
Follow the procedures below to install and adjust the EXES-2000 system:
Observe the following precautions in installing each equipment:
Allow for weight exerted on the wall when mounting the exchange on
it.
Each equipment is to be so installed as to permit easy checkup and
maintenance.
When the PA paging or talk-back function is employed, keep the
station and speaker as apart as possible from each other in order to
avoid feedback.
Do not install the exchange nor the station in the following locations:
(A) Areas where unit is exposed to heat or sunlight.
(B) Areas where metallic particles or dust are accumulated.
(C) Areas close to chemicals or oil.
(D) Areas of high moisture or near the window where unit may be
splashed by rain water.
(E) Areas close to high voltage equipment or where strong electric
field exists.
Installation of equipment
4-1 Selection of the place to install
Installation and adjustment
Installation of equipment
Cable installation
Connection of equipment
Selection of function by No. 24 programming
Speech and performance tests
– 4 –