Filter
Top Products
6 947101
(W/BL)
(BL/W)
(W/O)
(W/G)
(W/S)
(S/W)
(R/BL)
(BL/R)
(R/G)
(G/R)
(R/BR)
(BR/R)
(V/BR)
(BR/V)
(V/S)
(S/V)
26
1
27
28
30
5
31
6
33
8
34
9
49
24
50
25
TIP
RING
PABX LOOP TRUNK PORT
OR ELECTRONIC KEY
SYSTEM LINE BUTTON
PUNCHDOWN
BLOCK
T
R
(W/BL)
(BL/W)
H
DIR
(W/G)
BFT (W/S)
BFR (S/W)
A1
(W/O)
(R/BL)
A1 (BL/R)
MT (R/G)
MR (G/R)
PG
(R/BR)
OUT(BR/R)
AG (V/BR)
AB (BR/V)
BG (V/S)
BB (S/V)
A GROUND
A BATTERY
B GROUND
B BATTERY
-24VDC POWER SUPPLY
ONE-WAY
AMPLIFIED SPEAKER
ASSEMBLIES
FIGURE 3
ELECTRONIC KEY SYSTEM LINE BUTTON ACCESS OR PABX LOOP TRUNK ACCESS
V-1101A
WIRING INSTRUCTIONS
Place a check by each step as it is completed.
__ 1. Add a strap on the V-1101A punchdown
block from Tip to BFT (W/BL to W/S).
__ 2. Add a strap from Ring to BFR (BL/W to
S/W).
__ 3. Add a strap from H to DIR (W/O to W/G).
__ 4. Add a strap from DIR to Red/Blue (W/G to
R/BL).
__ 5. Add a strap from Blue/Red to BG (BL/R to
V/S).
__ 6. Connect Tip of the one-way amplified
speaker assemblies to the V-1101A PG lead
(R/BR).
__ 7. Connect Ring of the speakers to the OUT
lead (BR/R).
__ 8. Connect the GND terminal of the speakers
(black lead of horns) to the power supply
Ground ("+" or "B Ground").
__ 9. Connect the –24 Vdc lead of the speakers
(white lead of horns) to the power supply
–24 Vdc ("-" or "B Battery").
__ 10. Plug in the power supply.
__ 11. Test the unit by connecting a lineman's test
set across the V-1101A Tip and Ring:
__ (a) Go "off hook" and speak. Your voice
should come out the speakers.
__ (b) If you hear the page: disconnect your
test set and go to step 12.
__ (c) If you do not hear the page:
(1) unplug the power supply;
(2) go back to step 1 and recheck all
your connections.
__ 12. Connect the tip (W/BL) of the V-1101A to
Tip of your telephone system loop trunk port
(PABX) or C.O. line position (E-key).
__ 13. Connect the Ring (BL/W) of the V-1101A to
Ring of the telephone system.
__ 14. Test the system by dialing the proper trunk
access code (PABX) or pressing the
appropriate line key (E-key) and speaking
into the handset:
__ (a) If you hear the page, go to step 15.
__ (b) If you do not hear the page, verify proper
telephone system configuration and
programming. If you have programming
questions, contact the telephone system
manufacturer.
__ 15. Adjust the volume controls on the individual
speakers to the desired levels.
__ 16. If background music is to be provided:
__ (a) Connect the music source to the
V-1101A MT and MR (R/G and G/R).
__ (b) With the V-1101A idle adjust the music
source volume control to provide the desired
level at the speakers.