Filter
Top Products
Chapter 3
Getting Connected
29
WiFi Connection
Through the use of the SDIO card, you can send and receive signals to a
WiFi network then synchronize files.
NOTE: WiFi access requires a separate purchase of a service contract with a
wireless service provider. Contact a wireless service provider for more
information.
A wireless network can be added either when the network is detected or by manually
entering settings information. Before performing these steps, determine if authentication
information is needed.
1. Tap Start → Settings, then tap the Connections tab.
2. Tap Network Cards.
The Configure Network Adapters screen
appears.
3. Select whether the network card connects
to the Internet or your work LAN from the
drop-down list.
4. If there are networks already detected, tap
and hold network name, then select
Connect.
5. Under the Network to access, select from
the following network connection options:
– All available
– Only access points
– Only computer-to-computer
6. When finished, tap OK.
For more information on how to configure the
wireless network settings, tap Start → Help.