Filter
Top Products
C. Connect the Main Base and Charging Cradle(XSA1255+1 only), and
Charge the Handsets
1) Connect each AC adapter to the DCIN 9V jack and
to each standard 240V AC wall outlet.
2) Place one handset in the main base and the other
in the charging cradle with the keypad facing
forward.
3) Make sure the charge/in use LED and charge LED
illuminate. If the LED does not illuminate, check
to see that the AC adapter is plugged in and the
handset makes good contact with the cradle's
charging contacts.
• Connect each AC adapter to a continuous power supply.
• Place each cradle close to the AC outlet to avoid
long extension cords.
4) Charge your handsets at least 15-20 hours before
plugging the phone line.
5) Once the handset battery packs are fully charged,
connect the telephone cord to the TEL LINE
jack and a telephone outlet. If your telephone outlet
isn't modular, contact your telephone
company for assistance.
! Use only the
supplied AAD-
041S adapter.
Do not use any
other AC
adapter.
! Do not place the
power cord
where it creates
a trip hazard or
where it could
become chafed
and create a fire
or electrical
hazard.
[8]
Australia
Tel Line adaptor
(not supplied)
GETTING STARTED