Uniden XSA1255+1 Cordless Telephone User Manual


 
Note on Power Sources
Low battery alert When the battery pack is very low and needs to be charged,
the phone is programmed to eliminate functions in order to save power. If the
phone is not in use, Low Battery appears on the LCD and none of the keys
will operate. If the phone is in use, Low Battery flashes and the handset
beeps. Complete your conversation as quickly as possible and return the
handset to the cradle for charging.
Information stored in the phone's memory will be retained for 30 minutes after the battery
pack is removed. This includes all setup information, last number dialed, speed dial memory,
RocketDial programming, and the CID list.
Even when the battery pack is not being used, it will gradually discharge over a long period of time. For
optimum performance, be sure to return the handset to the cradle after a telephone call.
Battery replacement and handling
When the operating time becomes short even after a battery is recharged, please replace the battery.
With normal usage, your battery should last about one year. A replacement battery may be purchased
by visiting our website www.uniden.com.au or www.uniden.co.nz
Warning: To avoid the risk of personal injury or property damage from fire or electrical shock, only use
the Uniden battery model and Uniden adapter model specifically designated for this product.
Power Failure
During the period that the power is
off, you will not be able to make or
receive calls with the telephone.
Caution
• Use only the specified Uniden battery pack (BT-905 or BT-905s).
• Do not remove the batteries from the handset to charge them.
• Never throw the battery into a fire, disassemble them, or heat them.
• Do not remove or damage the battery casing.
[51]