Filter
Top Products
51
Remote Commands
Command Function Command Function
[#] then [1] Repeat a message* [#] then [5] Stop operation
[#] then [2] Play incoming messages [#] then [6] Answering system on
[#] then [3] Skip a message [#] then [9] Answering system off
[#] then [4] Delete a message [#] then [0] Help
* If you press
[#] then [1] in the rst four seconds of a message, the system skips to the previous message.
If you press [#] then [1] after the rst four seconds of a message, the system repeats the current
message.
When you nish, you will hear intermittent beeps indicating that the system is in the command waiting mode.
Enter another command from the chart within 15 seconds.
Hang up to exit the system. The answering system automatically returns to its normal standby setting.
5)
6)