Filter
Top Products
13
Wall Mounting the Base
This phone can be mounted on any standard wall plate (for Australia).
Snap the wall mount adapter into the notches on the base top.
Plug the AC adapter into the DC IN 9V jack.
Wrap the AC adapter cord inside the molded wiring channel as shown.
Plug the AC adapter into a standard 240V AC wall outlet.
Plug the telephone cord into the TEL LINE jack.
Plug the telephone cord into the telephone outlet.
Align the mounting slots on the base with the mounting posts on the wall. Then push in and down until the phone
is rmly seated.
Note: DO NOT use an AC outlet controlled by a wall switch.
1)
2)
3)
4)
5)
6)
7)
AC outlet
Wall plate
AC adapterAC outlet
Wall plate
AC adapter