Filter
Top Products
14
Registering FIPS Code
Six digit FIPS Codes are programmable in 15
channels, Number 1~15 for NWR-SAME
Weather Alert. Contact the National Weather
Service at 1-888-NWR-SAME for the FIPS
Codes in the area of interest, or visit
www.noaa.gov/nwr/indexnw. htm
1. Press and hold the
MEM
key for 2 seconds.
2. Select the channel,
numbers 1~15, you
want to program
using the s or t key.
3. Press the
MEM
key to enter the FIPS Code
edit mode.
4. To enter the first
digit of the code,
change the left
blinking digit on the
display using the s
or t key and press
the
MEM
key. The right
digit starts to blink.
5. To enter the second digit of the code,
change the right blinking digit on the
display using the s or t key and press the
MEM
key.
The entered digit
moves to the left and
the right digit starts
to blink.
6. Repeat step 5 for the remaining digits of
the code.
7. After the last digit registers, the entered
code appears on the display automatically
for confirmation.
8. To exit from this mode, press and hold the
MEM
key for 2 seconds.
9. Press
U/I/C
to clear the stored FIPS Code
in the displayed location.
+ Pressing the MEM key for more than 2
second in the middle of the above steps
prevents registration.