Filter
Top Products
Step 2 Install and Charge the Handset Battery
TO INSTALL THE HANDSET BATTERY
When the handset battery pack is fully charged,
after 15-20 hours of charging, plug the telephone
cord into the base unit and then into a telephone
wall jack.
Your phone is set for tone dialing. If your local
network requires pulse dialing, please see
“Choosing the dialing mode” on page 16.
A
Remove the cover.
TO SET CALLER ID, LANGUAGE AND DIALING OPTIONS
A
Press and hold call id/menu.
B
Press ▲ or ▼ to move the pointer to an
option.
C
Press select to change the option setting.
D
Press end to exit, and return the handset
to the base.
OPTIONS INCLUDE
A
AutoTalk On/Off
B
CIDCW On/Off
(Caller ID on call waiting)
C
Area Code Enter/Remove
D
Dial Pulse/Tone
D
Plug the AC adapter cord into the base
unit and then into a 120V AC outlet.
E
Place the handset in the base and charge
continuously for 15 - 20 hours before using
the phone.
B
Connect the battery pack
connector with the
correct polarity.
C
Replace the cover.
Note: There are five setup options available. They are
Caller ID options [AutoTalk, CIDCW (Caller ID on Call
Waiting), Area Code], Dial Mode and Language.
QUICK REFERENCE GUIDE
Step 3 Connect to Phone Line
Step 4
Set Menu Options
Uniden Customer Hotline
at 1-800-297-1023 (Mon
- Fri 7 am to 7 pm,
Sat/Sun/holidays--except
Thanskgiving and
Christmas--9 am to 5 pm,
CST).
We can also be reached
on the web at
www.uniden.com
Make sure you have received the following items in
the package. If any of these items are missing or
damaged, contact the Uniden Customer Hotline.
• Base unit
• Handset
• AC adapter
• Rechargeable battery
• Telephone cord
• Beltclip
• This owner’s manual
• Other printed
material
QUICK REFERENCE GUIDE [ 3]www.uniden.com
Step 1 Check the Package Contents
E
Language English/French/Spanish