Filter
Top Products
USING THE SPEED DIAL MEMORY[ 24 ] www.uniden.com
If the next character
uses the same number
key, you must press the
#/ key to move the
cursor over. Otherwise
the next time you press
the number key, it
changes the character
that was previously set.
4) Enter a name according to the instructions below, then press the select key. If no
name is required, go to step 5.
• The name can be up to 13 characters.
• Use the
#/ and /tone/
key
to move the cursor to the desired location.
• Use the
delete/chan key to delete characters as needed.
• Press and hold the
delete/chan key to delete all the characters.
Refer to the letters on the number keys to select the desired characters.
With each press of a numeric key, the displayed character appears in the following
order: upper case letters first, lower case letters next and finally the number
corresponding to the key.
If you make a mistake while entering a name
Use the /tone/
or
#/ key to move the cursor to the incorrect character.
Press the
delete/chan key to erase the wrong character. Then enter the correct
character. To delete all characters, press and hold the
delete/chan key.
Number of times key is pressed
Number of times key is pressed