Filter
Top Products
BASIC SETUP
BASIC SETUP [ 17]www.uniden.com
1) When the phone is in standby mode, press and hold the
call id/menu key. The following screen appears.
2) Press the
▼ key three times to select Dial.
3) Press the
select key to set the phone to pulse
dialing.
4) Press the
end key to complete the setting. The handset returns to standby mode.
Setting the language
You can change the language the menu display uses. Choose from English, French, or
Spanish.
1) When the phone is in standby mode, Press and hold the
call id/menu key. The following screen appears.
2) Press the
▼ key four times to select Language.
3) Press the
select key to select Eng, Fr. or Esp.
4) Press the
end key to complete the setting.
The handset returns to standby mode.
Selecting the Ring Tone and Volume
Your phone has five different ringer tone/volume combinations you can choose from.
1) With the phone in standy mode, press the
▲ or ▼ key.
2) The phone will sound the different ring tones at different volumes. To turn the
ringer off, select
Ringer Off.
3) When the phone sounds the ring tone and volume you wish to use, press the
end key.
If your phone system
requires pulse dialing
and you need to send
the DTMF tones for
certain situations
during a call, you may
"Switch Over" to tone
dialing. (Refer to "Tone
Dialing Switch Over" on
page 20.)