Filter
Top Products
THE INTEGRATED ANSWERING DEVICE[ 40 ]
Setting the Time
The clock on the EXAI378 series answering system starts when power is supplied
to the base. Follow these steps to set the clock to the correct time.
status
1)Press menu.
The system announces “Time” and the current time. The
message counter displays the current numbers ([ ]
through [ ]) indicating the day of the week.
2)Press
skip/ff or repeat/rew until the correct day is
announced. The numbers [ ] through [ ] are
displayed on the base.
3)Press
set/ringer to select the day.
4)Press
skip/ff or repeat/rew until you hear the correct
hour setting. The numbers [ ] through [ ] are
displayed on the base as each hour is announced.
5)Press
set/ringer to select the hour.
6)Press
skip/ff or repeat/rew until you hear the correct
minute setting. The numbers [ ] through [ ] are
displayed on the base as each minute is announced.
• Normally the idle
time for the menu
mode is 30 seconds
before the system
returns to standby.
However for setting
the time, the idle
time is extended to
two minutes.
• Press and hold
skip/ff or
repeat/rew to
quickly scroll
through the numbers
on the display.
EXAI378 2/8/2 6:57 PM Page 40