Filter
Top Products
[ 16 ]
To enter your Area Code
If you enter a 3-digit area code number in the
Area Code option, your local
area code does not appear in Caller ID messages. Do not program this option, if
your calling area requires 10-digit dialing.
When reviewing Caller ID messages, you will see only the local seven digit
number. For calls received from outside your local area code, you will see a full
10-digit number.
1)When the phone is in the standby mode, press and hold
cid/menu. The following screen appears.
2)Press
3 or press twice to select “Area Code”.
3)Press
select.
4)Use the number keys (
0 to 9), #/,
*
/tone
/,
or
delete/ch to enter the 3-digit area code.
5)Press
select. A confirmation tone sounds and the displayed area code is entered.
6)Press
end or return the handset to the base unit to complete the setting. The
handset returns to the standby mode.
When the area code has already been stored in memory, the
stored area code will be displayed. To change it, use the
delete/ch and number keys to enter the new area code.
Then press
select. A confirmation tone sounds.
To complete the setting, press
end or return the handset
to the base unit.
If your calling area
requires 10-digit
dialing, do not program
this option.
EXAI378 2/8/2 6:57 PM Page 16